- 4-bit MCU selection
- 8-bit RISC Product Selection
- 8051 Product Selection
-
32-bit MCU Selection
Entry-Level Universal (TM32G074 series) Optical Modules (TM32G075 Series) Motor and Battery Management (TM32G076 Series) Home Appliance Master (TM32G077 Series) Multi-Application Compound (TM32G078 Series) Motor Specific Chip (TM32G051 Series) F-Series M0 F-Series M3 F-Series M4 F Series Motor Specific
- Power Selection
- Other Product Selection
TM8722
GENERAL DESCRIPTION
The TM8722 is an embedded high-performance 4-bit microcomputer with LCD/LED driver. It contains all the necessary functions, such as 4-bit parallel processing ALU, ROM, RAM, I/O ports, timer, clock generator, dual clock operation, Resistance to Frequency Converter(RFC), EL panel driver, LCD driver, look-up table, watchdog timer and key matrix scanning circuitry in a signal chip.
BLOCK DIAGRAM
FEATURE
1.Low power dissipation.
2.Powerful instruction set (143 instructions).
Binary addition, subtraction, BCD adjust, logical operation in direct and index addressing mode.
Single-bit manipulation (set, reset, decision for branch).
Various conditional branch.
16 working registers and manipulation.
Table look-up.
LCD driver data transfer.
3.Memory capacity.
ROM capacity2048x 16 bits.
RAM capacity128x 4 bits.
4.LCD/LED driver output.
5 common outputs and 35 segment outputs (up to drive 175 LCD/LED segments).
1/2 Duty, 1/3 Duty, 1/4 Duty or 1/5 Duty for both LCD/LED drivers is selected by mask option.
1/2 Bias or 1/3 Bias for LCD driver is selected by mask option.
Single instruction to turn off all segments.
All segment outputs could be defined as CMOS or P_open drain output type by mask option.
5.Input/output ports.
Port IOA4 pins (with internal pull-low), muxed with SEG24~27.
Port IOB4 pins (with internal pull-low), muxed with SEG28~31.
Port IOC4 pins (with internal pull-low/low-level-hold), muxed with SEG32~35.
IOC port had built in the input signal chattering prevention circuitry.
6.8 level subroutine nesting.
7.Interrupt function.
External factors3(INT pin, Port IOC & KI input).
Internal factors4(Pre-Divider, Timer1, Timer2 & RFC).
8.Built-in EL panel driver.
ELC, ELP (Muxed with SEG28, SEG29).
9.Built in Alarm, clock or single tone melody generator.
BZB, BZ (Muxed with SEG30, SEG31).
10.Built-in R to F Converter circuit.
CX, RR, RT, RH (Muxed with SEG24~SEG27).
11.Built in key matrix scanning function.
K1~K16 (Shared with SEG1~SEG16).
KI1~KI4 (Muxed with SEG32~SEG35).
12.Two 6-bit programmable timer with programmable clock source.
13.Watch dog timer.
14.Built-in Voltage doubler, halver, tripler charge pump circuit.
15.Dual clock operation
slow clock oscillation can be defined as X’tal or external RC type oscillator by mask option.
fast clock oscillation can be defined as internal R or external R type oscillator by mask option.
16.HALT function.